R-KER-II Hybrid resin with Rebar as an Anchor

High performance hybrid resin approved for use with reinforcement bars

Features and benefits

  • Approved for use in cracked and non-cracked concrete (EAD 330499-01-0601), working life up to 100 years
  • Winter version can be used in warmer temperatures for faster curing
  • Suitable for use in dry and wet substrates as well as holes and substrates covered with water
  • Rapid bonding time enables quick execution of works
  • Very high load capacity
  • Anchor does not generate expansion forces in the concrete which means reduced spacing and edge distances.
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle
  • Tests in fire conditions confirm the fire resistance up to R120

Product information

Product Code

Resin

Description / Resin Type

Volume

[ml]

R-KER-II-300

R-KER-II

R-KER II Hybrid Resin

300

R-KER-II-345

R-KER-II

R-KER II Hybrid Resin

345

R-KER-II-400

R-KER-II

R-KER II Hybrid Resin

400

R-KER-II-300-S

R-KER-II-S

R-KER II Hybrid Resin for High Temperature (Summer) / Slow Cure Styrene Free Hybrid Resin

300

R-KER-II-400-S

R-KER-II-S

R-KER II Hybrid Resin for High Temperature (Summer) / Slow Cure Styrene Free Hybrid Resin

400

R-KER-II-300-W

R-KER-II-W

R-KER II Hybrid Resin for Low Temperature (Winter) / Rapid Cure Styrene Free Hybrid Resin

300

R-KER-II-400-W

R-KER-II-W

R-KER II Hybrid Resin for Low Temperature (Winter) / Rapid Cure Styrene Free Hybrid Resin

400

R-KER-II-300-SV

R-KER-II

R-KER II Hybrid Resin

300

Base material

  • Non-cracked concrete C20/25-C50/60

    Non-cracked concrete C20/25-C50/60

  • Cracked concrete C20/25-C50/60

    Cracked concrete C20/25-C50/60

Applications

  • Curtain walling
  • Balustrading
  • Barriers
  • Cable trays
  • Cladding restraints
  • Structural steelwork
  • Rebar dowelling
  • Starter bars
  • Rebar missed-outs

Installation guide

Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
  1. Drill hole to the required diameter and depth for rebar size being used.
  2. Clean the drill hole thoroughly with brush and hand pump at least four times before installation
  3. Insert cartridge into gun and attach nozzle.
  4. Dispense to waste until even colour is obtained (min. 10 cm)
  5. Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
  6. Immediately insert the rebar, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.

Installation data

REBARS AS ANCHORS

Size

Ø8

Ø10

Ø12

Ø14

Ø16

Ø20

Ø25

Ø32

Rebar diameter

ds

[mm]

8

10

12

14

16

20

25

32

Hole diameter in substrate

d0

[mm]

12

14

18

18

22

26

32

40

Min. hole depth in substrate

h0

[mm]

hnom+5

hnom+5

hnom+5

hnom+5

hnom+5

hnom+5

hnom+5

hnom+5

Min. substrate thickness

hmin

[mm]

hnom+30 ≥100

hnom+30 ≥100

hnom+30 ≥100

hnom+30 ≥100

hnom + 2d0

hnom + 2d0

hnom + 2d0

hnom + 2d0

Min. spacing

smin

[mm]

40

40

40

40

40

40

50

70

Min. edge distance

cmin

[mm]

40

40

40

40

40

40

50

70

MINIMUM EMBEDMENT DEPTH

Min. installation depth

hnom,min

[mm]

60

60

60

60

64

80

100

128

MAXIMUM EMBEDMENT DEPTH

Min. installation depth

hnom, max

[mm]

160

200

240

240

320

400

500

640

Minimum working and curing time

R-KER-II

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

0

3 h

30

5

5

90

15

10

10

60

8

15

15

60

5

20

20

45

2.5

25

25

45

2

25

30

45

2

25

35

30

1.5

25

40

30

1.5

*For wet concrete the curing time must be doubled

R-KER-II S

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

5

12 h

40

10

10

8 h

20

15

15

6 h

15

20

20

4 h

10

25

25

3 h

9.5

25

30

2 h

7

25

35

2 h

6.5

25

40

1.5 h

6.5

*For wet concrete the curing time must be doubled

R-KER-II W

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

0

2 h

14

5

5

60

9

10

10

45

5.5

15

15

30

3

20

20

15

2

25

25

10

1.5

25

30

10

1.5

25

35

5

1

25

40

5

1

*For wet concrete the curing time must be doubled

Associated products

  • R-NOZ-P Dosing Plug

    R-NOZ-P Dosing Plug

  • RT-IS Long impact sockets 1/2

    RT-IS Long impact sockets 1/2"

  • RT-MAXH Hollow drill bits Dustlessdrill SDS max

    RT-MAXH Hollow drill bits Dustlessdrill SDS max

  • R-GUN-MULTI Manual dispenser for bonded anchors in cartridges

    R-GUN-MULTI Manual dispenser for bonded anchors in cartridges

  • R-NOZ-KER-II Mixer nozzle for R-KER-II

    R-NOZ-KER-II Mixer nozzle for R-KER-II

  • RT-SDSR Drill bits Rebardrill SDS plus

    RT-SDSR Drill bits Rebardrill SDS plus

  • R-BLOWPUMP Blow Pump

    R-BLOWPUMP Blow Pump

  • R-GUN Battery Extrusion Gun with Dosing 380 ml

    R-GUN Battery Extrusion Gun with Dosing 380 ml

  • RT-SDSH Hollow drill bits Dustlessdrill SDS plus

    RT-SDSH Hollow drill bits Dustlessdrill SDS plus

  • RT-MAXT Turbodrill SDS MAX

    RT-MAXT Turbodrill SDS MAX

  • R-BRUSH for Automatic Cleaning System

    R-BRUSH for Automatic Cleaning System

  • R-BRUSH Manual Cleaning System

    R-BRUSH Manual Cleaning System

  • ce
  • iso 9001
  • ISO 4001
  • isots16949
  • ohsas 18001
  • tuv