R-ITS-A4 Internally Threaded Sockets
Internally threaded socket for the attachement of suitable bolt or threaded rod. ETA Approved with pure epoxy resin
Features and benefits
- Allows removal of bolt to leave a re-usable socket in place
- High load-bearing capacity
- Close edge and spacing distances
- Expansion free functioning
- Available in zinc plated and stainless steel versions
Product information
Size |
Product Code |
Anchor |
Fixture |
||
Socket diameter |
Length |
Internal thread length |
Hole diameter |
||
d |
L |
lg |
df |
||
[mm] |
[mm] |
[mm] |
[mm] |
||
M6 |
R-ITS-A4-06075 |
10 |
75 |
24 |
7 |
M8 |
R-ITS-A4-08075 |
12 |
75 |
25 |
9 |
R-ITS-A4-08090 |
12 |
90 |
25 |
9 |
|
M10 |
R-ITS-A4-10075 |
16 |
75 |
30 |
12 |
R-ITS-A4-10100 |
16 |
100 |
30 |
12 |
|
M12 |
R-ITS-A4-12100 |
16 |
100 |
35 |
14 |
M16 |
R-ITS-A4-16125 |
24 |
125 |
50 |
18 |
Base material
-
Non-cracked concrete C20/25-C50/60
Applications
- For fastening bolts
- Safety barriers
- Temporary works/formworks support systems
Installation guide
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_01_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_02_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_03_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_04_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_06_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_07_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_08_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_09_WebRes.png)
![Installation guide](https://assets.rawlplug.com/05d18cff-ef80-44ed-8b2b-acda68226ce1/S/R-ITS_stud_inst_draw_10_WebRes.png)
- After injecting resin, immediately insert the socket anchor, slowly and with a slight twisting motion until flush with surface
- Remove excess resin, then leave anchorage undisturbed until curing time has elapsed
- Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
- Attach fixture and tighten the nut to the required torque.